Wave-reflow soldering oven generated amount of oxide during soldering . The oxide ( tin residue ) can not totally separate from stannum , therefore , more than 60% pure is included in the tin residue to be regard asflotsam. Such big waste caused the high cost of electronic products production.
We successfully developed tin residue recycle machine (model no . OEE-SRS-1 after one year's devel opment and
hard work to overcome the problem of material degenerative. The purified tin , which epurated through soldering point , has passed SGS certification . The recycled tin remains it ratio and mechanical performance as original one. The machine reuseness is above 99%.

1、Separating the tin under normal soldering temperature to ensure its
normal physics mechanical performance.
2、Low voltage design realizing lower power consumption, and maximum
Save the cost.
3、The recycled tin has passed SGS certification.
4、The machine is reliable and easy to maintenance and operation
5、Symmetrical helix design on the separator that is effectively
prevents the residue damage the separate plate.
6、The oven and separator are all made by titanium.
7、Stainless steel build the inner part of the machine that has higher
Antisepsis and easy to clean.
8、The whole processing of the molding with high force, the cooling
Slot design at the bottom can cool the tin fast.
9、Equipping high force air exhaust device at inner side.
10、Using hazard-free vegetal additive, green and non-pollution.